The FM Graham unitized curtain wall systems create the best of two worlds by combining either a captured frame system or a structurally glazed system with the benefit of shop pre-assembly. Field installation time is greatly reduced due to shop assembly under controlled conditions.
CAPTURED UNITIZED FEATURES
- Outside glazed, captured curtain wall systems
- Split male-female mullion which allows factory assembly and sealing to reduce cost and improve quality control
- 1⁄4” glazing gaskets with 3⁄8” thick thermal insulator
- Accommodates 1⁄4” to 11⁄8” infill material depending on model
- Infill material secured by screw applied pressure plate
- Snap-on cover conceals pressure plate screws and allows dual colors
STRUCTURAL GLAZED UNITIZED FEATURES
- Outside glazed with vertical structural, butt glazed joints
- Glass secured to vertical with 1⁄4” x 1⁄2” structural silicone seal
- Split male-female mullion which allows factory assembled and sealing to reduce cost and improve quality control
- 1⁄4” glazing gaskets with 3/8” thick thermal insulator at the horizontals
- Accommodates 1⁄4” to 11⁄8” infill material depending on model
- Infill material secured at the horizontals by screw applied pressure plate
- Snap-on covers at horizontals conceal pressure plate screws and allows dual colors
